Traction Drive Belt Replacement
Note: The trailing shield has been removed for
photo purposes.
Traction Drive Belt Removal
1. Remove the mower spindle drive belt. Refer to:
"Mower Spindle Drive Belt Belt Removal (36" Mower
Deck)" on page 8-4, or "Mower Spindle Drive Belt
Belt Removal (40", 48", 52" and 60" Mower Decks)"
on page 8-1.
2. Unplug the clutch from the wire harness (Fig. 1049).
Fig 1049
Floating Deck Mid-Size Service Manual
3. Push the clutch wire plug and grommet through the
engine deck frame (Fig. 1050).
4. Remove the bolt, nut, 2 washers and spacer secur-
ing the brake clutch strap to the underside of the
chassis (Fig. 1051).
PICT-1422
GEAR DRIVE
Fig 1050
PICT-1357
Fig 1051
PICT-1368
7
7-1