Toro 30284 Service Manual page 34

2. Assemble the bolt, washers, nut and strap into the
slotted opening on the clutch as shown. Before
tightening, move the strap fastener assembly to the
outer-most end of the slot and tighten (Fig. 0015).
Fig 0015
3. Install the 2 cupped washers (crown side facing the
bolt head) and 1 fl at washer onto the clutch bolt (Fig.
0016).
Fig 0016
Floating Deck Mid-Size Service Manual
4. Apply thread locking compound to the clutch bolt
(Fig. 0017).
PICT-0557
5. Apply anti-sieze compound to the engine crankshaft.
Slide the electric clutch onto the crankshaft (Fig.
0018).
PICT-0351a
CHASSIS
Fig 0017 PICT-0352a
Fig 0018 PICT-0354a
3
3-5