Control Linkage & Thumb Latch Installation - Toro 30284 Service Manual

12. Remove the bushing sleeves from the drive lever
handle (Fig. 0338).
Fig 0338
Control Linkage & Thumb Latch Installation
1. Install the bushing sleeves into the drive lever
handle (Fig. 0339).
Fig 0339
Floating Deck Mid-Size Service Manual
2. Install the drive lever bushing into the drive lever
handle (Fig. 0340).
PICT-0702a
3. Assemble the drive lever assembly to the handle bar
with a bolt (Fig. 0341).
PICT-0703a
LINKAGE
Fig 0340 PICT-0701
Fig 0341 PICT-0700
4
4-13