Hydro Control Linkage Adjustment - Toro 30284 Service Manual

3. Loosen the nut against the yoke (Fig. 0767).
A
F
G
F
Fig 0767
A. Neutral control linkage E. Slot in control arm
B. Yoke
C. Neutral stud
D. Nut against yoke
4. Adjust the length of the neutral stud and yoke as-
sembly so the clevis pin does not contact the back of
the slot in the control arm bracket (Fig. 0767).
5. Tighten the nut against the yoke (Fig. 0767).
Floating Deck Mid-Size Service Manual
C
D
B
E
fi g. 46 G001965
bracket
F. Clevis pin
G. Clevis pin does not
contact the back of slot

Hydro Control Linkage Adjustment

Engine must be running so control linkage ad-
justments can be performed. Contact with mov-
ing parts or hot surfaces may cause personal
injury.
Keep hands, feet, face, clothing and other body
parts away from rotating parts, muffl er and other
hot surfaces.
Mechanical or hydraulic jacks may fail to sup-
port machine and cause a serious injury.
• Use jack stands when supporting machine.
• Do not use hydraulic jacks.
LINKAGE
!
!
!
!
4-123
4