Choke Cable Replacement; Choke Cable Removal - Toro 30284 Service Manual

LINKAGE
62. Position the control panel cover/manual tube as-
sembly to the control panel (Fig. 0712).
4
63. Install 4 screws (2 on the left, 2 on the right) secur-
ing the control panel cover to the control panel (Fig.
0713).
64. Connect the negative battery terminal to the battery.
4-108
Fig 0712 PICT-1923
Fig 0713 PICT-1921

Choke Cable Replacement

Choke Cable Removal

1. Turn the engine off and remove the key from the
ignition.
2. Loosen the clamp that secures the choke cable to
the engine (Fig. 0714).
Fig 0714
3. Remove the choke cable from the clamp and re-
move the z-bend from the choke control lever (Fig.
0715).
Fig 0715
Floating Deck Mid-Size Service Manual
PICT-0627
PICT-0630