Idler Arm Assembly Replacement; Idler Arm Assembly Removal (40", 48", 52" And 60" Mower Decks) - Toro 30284 Service Manual

MOWER DECKS
14. If applicable, place the spring plate onto the self-
tapping screw shown (Fig. 1210):
15. Install 6 nuts onto the self-tapping screws. Ensure
the spring plate is positioned as shown (Fig. 1211).
8
8-18
Fig 1210 PICT-1235
Fig 1211 IMG-7943a
16. Reinstall the drive belt or belts, as applicable. Refer
to:
• "Mower Spindle Drive Belt Installation (40", 48", 52"
and 60" Mower Decks)" on page 8-2, or
• "Mower Spindle Drive Belt Installation (36" Mower
Deck)" on page 8-5 and
• "PTO Drive Belt Installation (40", 48", 52" and 60"
Mower Decks)" on page 8-7 or
• "PTO Drive Belt Installation (36" Mower Decks)" on
page 8-9.

Idler Arm Assembly Replacement

Idler Arm Assembly Removal
(40", 48", 52" and 60" Mower Decks)
1. Turn the ignition off and remove the key.
2. Set the parking brake.
3. Remove the carrier frame cover (Fig. 1212).
Fig 1212
Floating Deck Mid-Size Service Manual
PICT-1038