Control Bar Adjustment (T-Bar) - Toro 30284 Service Manual

LINKAGE

Control Bar Adjustment (T-Bar)

1. Initially adjust the control rods so that 2 1/4"
(5.715cm) of thread extends beyond the trunnion
fi ttings (Fig. 0780).
4
2. The control bar and upper handle must be parallel
when in the relaxed drive and brake positions (Fig.
0781).
4-132
Fig 0780 PICT-5303
Fig 0781 PICT-5332a
3. Engage the control bar (Fig. 0782).
Fig 0782
4. Using a ruler, measure the travel distance of the
pulley while releasing and engaging the control bar.
The travel distance should be approximately 3/4"
(19mm) (Fig. 0783).
Note: If the pulley travel is more the 3/4" (19mm),
the brakes must be adjusted. Refer to
"Checking the Brake", page 5-9.
A A
Fig 0783
A. 3/4" (19mm)
Floating Deck Mid-Size Service Manual
PICT-5314a
PICT-5324a & 5326a