Toro 30284 Service Manual page 185

LINKAGE
17. Insert the top end of the control rod into the control
bar/bail assembly (Fig. 0593).
4
18. Install a cotter pin into the upper end of the control
rod, securing it to the control bar/bail assembly (Fig.
0594).
4-78
Fig 0593 PICT-1682
Fig 0594 PICT-1736
19. Install the trunnion onto the control rod approxi-
mately 2" (5cm) (Fig. 0595).
Fig 0595
20. Insert a clevis pin into the trunnion (Fig. 0596).
Fig 0596
Floating Deck Mid-Size Service Manual
PICT-1678a
PICT-1676a