Spindle Rebuild And Installation - Toro 30284 Service Manual

MOWER DECKS
11. Remove the 2 bearings and the spacer from the
spindle housing (Fig. 1194).
12. Clean and inspect the housing, bearings and spacer
for wear and damage. Replace as necessary.
Spindle Assembly (Fig. 1195)
A
C
B
8
A. Spindle Shaft
B. Bearing (2)
C. Bearing Spacer
D. Spindle Housing
8-14
Fig 1194 PICT-1203
F H
B
G
E
D
Fig 1195 PICT-1204a
E. Bearing Shield
F. Pulley
G. Washer
H. Nut

Spindle Rebuild and Installation

1. Install a bearing into one side of the spindle housing
(Fig. 1196).
Fig 1196
2. Insert the spacer into the spindle housing (Fig.
1197).
Fig 1197
Floating Deck Mid-Size Service Manual
PICT-1208
PICT-1210