ELECTRICAL
Solenoid Switch Replacement
(Pistol Grip & T-2)
Solenoid Switch Removal (P.G. & T-2)
1. Turn the engine off and remove the key from the
ignition.
2. Disconnect the negative battery cable from the
battery.
3. Remove the nut and lock washer securing the starter
cable to the solenoid terminal. Remove the starter
cable (Fig. 1548).
9
9-48
Fig 1548
PICT-1920
4. Pull the boot back and remove the nut and lock
washer securing the battery cable to the solenoid
terminal. Remove the battery cable (Fig. 1549).
Fig 1549
5. Remove the harness wire from the solenoid terminal
(Fig. 1550).
Fig 1550
Floating Deck Mid-Size Service Manual
PICT-1880
PICT-1882