HYDROSTATIC DRIVE SYSTEM
11. Apply thread locking compound onto the 2 pulley set
screws. Thread the 2 set screws into the pulley hub
(Fig. 0998).
12. Install the pump pulley onto the pump shaft and
tighten the 2 set screws (Fig. 0999).
6
6-18
Fig 0998
PICT-0439
Fig 0999
PICT-0441
13. Torque the 2 set screws to 11 + 1 ft-lbs. (14.9 + 1.4
Nm) (Fig. 1000).
Fig 1000
14. Position the drive belt onto the pulley (Fig. 1001).
Fig 1001
Floating Deck Mid-Size Service Manual
PICT-0440
PICT-0403