Engine Installation - Pistol Grip Hydro - Toro 30284 Service Manual

36. Remove the remaining 3 engine mounting bolts and
nuts securing the engine to the chassis (Fig. 0818).
Fig 0818
38. Carefully lift the engine off the chassis.

Engine Installation - Pistol Grip Hydro

1. Carefully position the engine on the chassis.
2. Apply thread locking compound to the 4 engine
mounting bolts (Fig. 0819).
Fig 0819
Floating Deck Mid-Size Service Manual
3. Insert the rear right engine mounting bolt up through
the chassis and engine mounting hole. Install the
star washer, harness ground wires and negative
(black) battery cable onto the bolt. Loosely install the
nut onto the bolt (Fig. 0820).
PICT-0319
4. Loosely install the remaining 3 engine mounting
bolts and nuts (Fig. 0821).
PICT-0322
ENGINE
Fig 0820 PICT-0321a
Fig 0821 PICT-0319
5
5-9