Toro 30284 Service Manual page 72

10. Torque the castle nut to 6.5 ft-lbs. (8.8 Nm) while
turning the hub to seat the bearings and to remove
all endplay. Loosen the castle nut until it is away
from the washer/bearing. Tighten nut until it contacts
washer/bearing. Hub must be free to rotate and have
no endplay (Fig. 0162).
Fig 0162
11. Install the cotter pin securing the castle nut to the
axle (Fig. 0163).
Fig 0163
Floating Deck Mid-Size Service Manual
12. Fill the wheel hub cavity with grease (Fig. 0164).
13. Using a rubber mallet, install the dust cap into to
PICT-1654 wheel hub assembly (Fig. 0165).
PICT-1655
CHASSIS
Fig 0164 PICT-1656
Fig 0165 PICT-1657
3
3-43