CHASSIS
Brake Band Replacement
The following procedures are the same for both the left
and right brake band replacement.
Brake Band Removal
1. Turn the engine off and remove the key from the
ignition.
3
2. Raise the machine so the rear tire is off the ground.
3. Remove the 3 lower idler support mounting bolts
(Fig. 0135).
3-36
Fig 0135
PICT-1519
4. Loosen the idler support bracket pivot bolt (Fig.
0136).
Fig 136
5. Rotate the idler support bracket so that it is out of
the way of the transmission pulley (Fig. 0137).
Fig 0137
Floating Deck Mid-Size Service Manual
PICT-1520
PICT-1521