Toro 30284 Service Manual page 163

LINKAGE
38. Slide a trunion onto the speed control rod and snug
fi t a second nut against the trunnion (Fig. 0508).
4
39. Position the speed control rod so that the upper end
is installed in the forwardmost hole of the speed
control lever. Install a hairpin cotter into the speed
control rod securing it to the speed control lever (Fig.
0509).
4-56
Fig 0508 PICT-0878a
Fig 0509 PICT-0895
40. Position the speed control rod trunnion into the tab
on the speed control crank assembly (Fig. 0510).
Fig 0510
41. Install a washer onto the trunnion and secure the
trunnion with a cotter pin (Fig. 0511).
Fig 0511
Floating Deck Mid-Size Service Manual
PICT-0896
PICT-0897