Replacing A Multi-Functional Sensor - Huawei FusionModule2000 V500R003C10 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
Figure 5-47 Position of the WiFi module
----End

5.4.7 Replacing a Multi-Functional Sensor

Impact on the System
The temperature, humidity, and smoke cannot be sensed.
Preparations


Procedure
Step 1 The multi-functional sensor is clamped into a base through a slot and a buckle. Hold down the
multi-functional sensor and slide it to the side to remove the sensor.
Figure 5-48 Removing a multi-functional sensor
Step 2 Disconnect cables from the rear of the multi-functional sensor.
Step 3 Connect the cables to the reserved multi-functional sensor.
Issue 04 (2020-01-03)
Tools: ESD wrist strap, ESD gloves, Phillips screwdriver, step ladder, labels, marker
Material: multi-functional sensor
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
89