Replacing The Strip Light Of An Atmosphere Light - Huawei FusionModule2000 V500R003C10 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
3.
----End

5.4.21 Replacing the Strip Light of an Atmosphere Light

Impact on the System
The strip light of an atmosphere light is off during replacement.
Preparations


Procedure
Step 1 Remove the white rubber panels from the door frame.
Step 2 Remove the side covers from the posts.
Step 3 Cut off the cable tie that binds the strip light extension cable to the top of the post.
Step 4 Pull out the strip light from the hole at the bottom of the left post.
Step 5 Disconnect the strip light terminal from the strip light extension cable of the door post.
Step 6 Pull out the strip light from the fasteners.
Issue 04 (2020-01-03)
Figure 5-74 Replacing an LED light tube
Replace all failed LED light tubes until all LED light tubes in the aisle work properly.
Tool: ESD gloves
Material: atmosphere strip light
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
113