Common Maintenance Tasks; Operating A Hydraulic Circuit Breaker (Inside The Smart Rpdu) - Huawei FusionModule2000 V500R003C10 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
Procedure
Step 1 (Optional) If U space e-labels are faulty, perform the following steps to replace them.
1.
2.
Step 2 (Optional) If the asset detection strip is faulty, perform the following steps to replace it.
1.
2.
3.
4.
5.
Step 3 (Optional) If the main control box is faulty, perform the following steps to replace it.
1.
2.
3.
4.
----End

5.5 Common Maintenance Tasks

5.5.1 Operating a Hydraulic Circuit breaker (Inside the Smart
rPDU)
Hydraulic circuit breakers are important components of the smart rPDU.
Power-on Operation
Step 1 When the circuit breaker is OFF, press the button in the direction of the arrow to set the
circuit breaker to ON.
Figure 5-81 Power-on operation
----End
Issue 04 (2020-01-03)
Remove faulty U space e-labels from the customer equipment and the asset detection
strip.
Record the asset according to the commissioning guide.
Label the position of each U space e-label on the asset detection strip.
Remove all U space e-labels from the asset detection strip.
Remove the faulty asset detection strip.
Install a new asset detection strip in the original position.
Install the U space e-labels in the original positions based on the position labels.
Label each cable based on the corresponding ports on the main control box.
Remove the faulty main control box.
Install a new main control box in the original position.
Connect the cables to the new main control box based on the cable labels.
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
120