Huawei FusionModule2000 V500R003C10 Maintenance Manual page 39

FusionModule2000 Smart Modular Data Center
Maintenance Guide
Item
Check the
availability of
the AC
actuator.
Check the
availability of
the skylight
actuator and
magnetic lock.
Check the
Issue 04 (2020-01-03)
Operation
information such as
communication
status and
temperature.
1. On the ECC800
WebUI, choose
Monitoring >
Aisle > AC
Actuator
Group > AC
Actuator >
Running
Parameters, set
Set light mode
to Manual, and
click Submit.
2. On the ECC800
WebUI, choose
Monitoring >
Aisle > AC
Actuator
Group > AC
Actuator to
enter the
Controls page,
and remotely
control the
lights.
NOTE
After checking the
AC actuator, set Set
light mode to the
status before you
perform 1.
On the ECC800
WebUI, choose
Monitoring >
Aisle > Skylight
Actuator Group >
Skylight Actuator
to enter the Controls
page, and remotely
control the skylight.
NOTE
If you open the
skylight remotely for
maintenance,
manually close the
skylight after the
maintenance is
complete.
On the ECC800
Copyright © Huawei Technologies Co., Ltd.
Standard
Lights in the smart
module aisle can be
normally controlled
through the AC
actuator.
The skylight in the
smart module aisle can
be normally controlled
through the skylight
actuator.
The smart module
3 Routine Maintenance
Troubleshooting
If the lights cannot be
normally controlled,
check whether the AC
power cable to the lights
is loose or disconnected.
If so, reconnect the
cable. If not, replace the
AC actuator.
If the skylight cannot be
normally controlled,
check whether the cable
between the skylight
magnetic lock and
actuator is in good
condition and securely
connected. If not,
replace the skylight
magnetic lock or
actuator.
If the smart module aisle
32