Synchronizing The Configuration Parameters; Replacing Power Supply And Distribution System Components; Parts Replacement For The Precision Pdc - Huawei FusionModule2000 V500R003C10 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
----End

5.1.2 Synchronizing the Configuration Parameters

Procedure
Step 1 After replacing components, log in to the ECC800 WebUI and choose Maintenance >
Parameter Sync to access the parameter synchronization page.
Step 2 Click Device type and select the component type from the drop-down list.
Step 3 Select the failure device in Source Device, select the reserved device in Target Device, and
click Submit to synchronize the configuration parameters of the failure device to the reserved
device.
----End
5.2 Replacing Power Supply and Distribution System
Components

5.2.1 Parts Replacement for the Precision PDC

For details about parts replacement for the precision PDC, see the "Parts Replacement"
section in the corresponding Precision PDC user manual.
Table 5-2 Replaceable parts of the precision PDC
No.
1
2
3
4
5
Issue 04 (2020-01-03)
 After the first login, change the password in time to ensure account security and prevent
unauthorized network attacks, such as data tampering. Huawei will not be liable for any security
issues caused by your failure to change the preset password in time or password loss after changing.
 Change the password of the user account periodically.

Record and keep the password properly. If you forgot the password, you will be unable to log in to
the WebUI.

When the event notification is configured and the password retrieval mode is configured under user
management, the password can be retrieved.

An account is logged out due to timeout if no operation is performed within 10 minutes after system
login.
 A maximum of three users can log in to the ECC800-Pro WebUI at the same time.
Copyright © Huawei Technologies Co., Ltd.
Replaceable Part
MCB (Miniature circuit breaker)
MDU (Monitor display unit)
SPD (Surge protective device)
Fuse
Indicator
5 Parts Replacement
48