Huawei FusionModule2000 V500R003C10 Maintenance Manual page 83

FusionModule2000 Smart Modular Data Center
Maintenance Guide
Figure 5-30 Components of a sliding door magnetic lock
(1) Magnetic lock fastener
(3) Magnet
(5) Magnet washer
Impact on the System
The access control function of the sliding door is unavailable.
Preparations


Procedure
Step 1 Remove cables from the magnetic lock and label the cables.
Step 2 Remove the magnetic lock to be replaced.
Step 3 Secure the magnet to the magnet fastener using the screws and washers available in the fitting
bag of the sliding door magnetic lock, as shown by (1) in
Step 4 Take out the magnetic lock and disassemble it, and keep the two screws removed, as shown
by (2) in
Step 5 Use the screws removed in the previous step to secure the disassembled magnetic lock to the
magnetic lock fastener, as shown by (3) in
Issue 04 (2020-01-03)
Tool: Phillips screwdriver
Material: magnetic lock
Figure 5-31.
Copyright © Huawei Technologies Co., Ltd.
(2) Magnetic lock
(4) Magnet fastener
Figure 5-31.
Figure 5-31.
5 Parts Replacement
76