Huawei FusionModule2000 V500R003C10 Maintenance Manual page 32

FusionModule2000 Smart Modular Data Center
Maintenance Guide
Item
Table 3-7 Quarterly maintenance for the management system
Item
Battery
management
parameter setting
Fire control
linkage function
Check the
connection of the
iBAT (BIM).
Issue 04 (2020-01-03)
Operation
on the main
screen, and set
the humidifier to
a certain value.
Operation
On the UPS
LCD, choose
System Info >
Settings >
Battery Param.
, and check
whether battery
management
parameter
settings meet
actual
requirements.
Simulate a
smoky
environment
under a smoke
detector or
multi-functional
sensor. (If real
smoke is not
allowed, press
the TEST button
on the sensor.)
Check whether
the iBAT (BIM)
is attached
firmly and
whether all
cables are
securely
Copyright © Huawei Technologies Co., Ltd.
Standard
Standard
Parameters are set
based on site
requirements.
 A smoke alarm is
displayed on the
active alarm page of
the WebUI.
 The skylight is
opened.

The alarm beacon
produces audible
and visual alarms.
 The iBAT (BIM) is
attached firmly.
 All iBAT (BIM)
cables are securely
connected.

No iBAT (BIM)
cable deteriorates
3 Routine Maintenance
Troubleshooting
inlet solenoid valve.
 If no water is
supplied to the wet
film humidifier,
check the cable
connection to the
water pump or
replace the
humidifier pump.
Troubleshooting
Set parameters
correctly.
 Check whether the
smoke detector or
multi-functional
sensor is faulty.
 Check whether the
skylight system is
normal.

If the alarm beacon
produces audible
and visual alarms,
check whether the
alarm beacon is
faulty and whether
the cable connection
is proper.
 Secure the iBAT
(BIM) again.
 Check that all iBAT
(BIM) cables are
securely connected.

Replace the faulty
cable.
25