FusionModule2000 Smart Modular Data Center
Maintenance Guide
Figure 5-28 Removing the access control device
Step 2 Remove cables from the old access control device and connect the cables to the new one.
Step 3 Install the new access control device on the baseplate and secure the device using screws at
the bottom.
Step 4 Log in to the ECC800 WebUI, choose System Settings > Access Management, and perform
the Synchronize Permission operation.
Step 5 Verify that the access control system is normal.
----End
5.4.3.3 Replacing a Button
Context
Impact on the System
The faulty button cannot be used.
Preparations
Procedure
Step 1 Remove the button.
Issue 04 (2020-01-03)
The light button and door open button (green) can reset automatically. Both BOM
numbers are 16050101.
The emergency button (red) needs to be manually reset. Its BOM number is 16050102.
The door open button, emergency button, and light button are replaced in the same way.
Tool: socket wrench
Material: door open button, emergency button, or light button
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
74