Replacing A Button - Huawei V500R003C00 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
Preparations


Procedure
Step 1 Remove screws from the bottom of the access control device and remove the access control
device from the baseplate.
Figure 6-20 Removing the access control device
Step 2 Remove cables from the old access control device and connect the cables to the new one.
Step 3 Install the new access control device on the baseplate and secure the device using screws at
the bottom.
Step 4 Log in to the ECC800-Pro WebUI, choose System Settings > Access Management, and
perform the Synchronize Permission operation.
Step 5 Verify that the access control system is normal.
----End

6.4.3.3 Replacing a Button

Context



Issue 05 (2020-03-25)
Tools: ESD wrist strap, ESD gloves, flat-head screwdriver, Phillips screwdriver, labels,
marker
Material: access control device
The light button and door open button (green) can reset automatically. Both BOM
numbers are 16050101.
The emergency button (red) needs to be manually reset. Its BOM number is 16050102.
The door open button, emergency button, and light button are replaced in the same way.
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
71