Replacing An Elight Strip Light - Huawei V500R003C00 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
3.
----End

6.4.19 Replacing an eLight Strip Light

Impact on the System
The eLight strip light is off during replacement.
Preparations


Procedure
Step 1 Remove three white rubber panels from the door frame.
Step 2 Remove the side covers from the posts.
Step 3 Cut off the cable tie that binds the strip light extension cable to the top of the post.
Step 4 Pull the strip light out of the bottom of the left post.
Step 5 Disconnect the strip light terminal from the strip light extension cable of the door post.
Step 6 Pull out the strip light from the fasteners.
Issue 05 (2020-03-25)
Figure 6-63 Replacing an LED light tube
Replace all failed LED light tubes until all LED light tubes in the aisle work properly.
Tool: ESD gloves
Material: eLight strip light
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
106