Draytek Vigor2960 Series User Manual page 97

Each item will be explained as follows:
Item
Edit
Refresh
Interface
Enable
Vigor2960 Series User's Guide
Description
Choose the interface listed below and click the Edit button
to modify the settings. A pop up window will appear for you
to change the settings.
Interface – Display the name of WAN interface.
Enable This Profile – Check it to enable such interface.
Speed – Use the drop down list to specify the transmission
rate (Auto, 10M, 100M or 1000M) for such interface.
flow_control – Click Enable to enable such function. When
the data cache is approaching to full load, Vigor router will
pause transmitting the packets till the system is able to
accept new data again. It can avoid the network traffic
congestion.
Apply – Click it to save and exit the dialog.
Cancel – Click it to exit the dialog without saving anything.
Renew current web page.
Display the name of the WAN port on the router.
Display the status of the profile. False means disabled; True
means enabled.
89