Draytek Vigor2960 Series User Manual page 337

4 . 1 4 . 4 .
4 . 1 4 . 4 .
Available parameters are listed as follows:
Item
Enable
Mail From
Mail To
SMTP Port
SMTP Server
Authentication
User Name
User Password
Send A Test Mail
Apply
Cancel
Vigor2960 Series User's Guide
3 M a i l A l e r t
3 M a i l A l e r t
Description
Check the box to enable such profile.
Type a mail address for the mail sender.
Assign a mail address for the mail receiver.
Add – Click this button to display a field for adding e-mail
address.
Save – After finished the address configuration, click Save to
save the setting onto the router.
Type the port number for SMTP server.
Type the IP address for SMTP server.
Click Enable to make any user logging into the mail server.
If you click Enable, you have to type user name and user
password on the below fields.
Type the user name for authentication.
Type the password for authentication.
Click it to send a test mail to the specified address.
Click this button to save the configuration and exit the web
page.
Click it to discard the settings configured in this page.
329