Draytek Vigor2960 Series User Manual page 140

Alias
Private IP
Protocol
Port Redirection
Mode
Public Port Start/
Public Port End
Private Port
Apply
Cancel
4. Enter all the settings and click Apply.
5. A new profile has been added onto Port Redirection table.
Single_Alias – You have to type one IP address used for IP
Alias.
All – All the IP address can be treated as IP Alias.
WAN IP alias that can be selected and used for port
redirection. Before using it, please go to WAN>>General
Setup and enable the wan1 profile. Add several IP addresses
under Static mode for wan1.
Specify the private IP address of the internal host providing
the service. Simply type the private IP used for this entry.
Choose the protocol used for the entry.
Specify the direction for the port to be redirected.
It is available when Range-to-One or Range-to-Range is
selected as Port Redirection Mode.
Type the starting/ending number of the public port.
For Range-to-One, set both Start and End values with the
same value.
Type a port number for such profile.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
132
Vigor2960 Series User's Guide