Draytek Vigor2960 Series User Manual page 310

Keep VPN Settings
Connected Devices
To avoid the VPN be disconnected due to the settings
changed by the client, the connection status can be kept by
specified by such feature.
Add – Click it to open the following dialog. Type the name
of the profile and choose the CPE from the Device drop
down list. Then, click Apply to save the settings. Such
profile will be applied to the device connecting to Vigor2960
with VPN.
Delete – Click it to delete the profile. The VPN between the
router and the client might not be guaranteed.
Refresh – Click it to refresh current page.
Profile – Display of the profile used now.
Device – Display the name of the CPE connected to Vigor
router via VPN.
Name – Display the name (can be modified by the
administrator) of the device. Refer to 4.11.2.1 CPE
Maintenance for detailed information.
Once the VPN is established successfully, the basic
information such as the connection type, IP address, RX/RX
will be displayed on this field.
Refresh – Click it to refresh current page.
VPN – Display the name of the VPN.
Type – Display the type of the connection mode.
Remote IP – Display the IP address of the remote end.
Virtual Network – Display the IP address of Vigor2960.
Up Time –Display the connection time of such VPN.
RX(Packets) /TX(Packets) –Display the number of the
packets exchanged in such VPN.
Disconnect – Click it to disconnect the VPN.
302
Vigor2960 Series User's Guide