Draytek Vigor2960 Series User Manual page 225

Password
Idle Timeout (sec)
Usage Time (min)
Account Login
Quota
System User
PPTP/L2TP
DHCP from
Static IP Address
Use mOTP
SSL Proxy
SSL Application
(VNC)
SSL Application
(RDP)
Vigor2960 Series User's Guide
Type a password for such profile (e.g., lug123,
wug123,wug456, etc). When a user tries to access Internet
through this router, an authentication step must be performed
first. The user has to type the password specified here to pass
the authentication. When the user passes the authentication,
he/she can access Internet via this router with the limitation
configured in this user profile.
If the user is idle over the limitation of the timer, the
network connection will be stopped for such user. By
default, the Idle Timeout is set to 300 seconds.
It means the maximum usage duration for the user. By
default, the Usage Time is 480 minutes.
It means the maximum persons allowed logging into Internet
via Vigor router.
The range is from 1 to 255. -1 means not limit; 0 means No
access.
Choose True to allow the user accessing into WUI of
Vigor2960 via the username and password above. If you
choose False, you can set SSL for such profile.
Click Enable to make network connection through
PPTP/L2TP protocol for users who access into Internet via
such profile.
Choose a LAN profile for DHCP server.
Type an IP address for such user profile which accesses
Internet with PPTP/L2TP connection.
Click Enable to make the authentication with mOTP
function.
mOTP PIN Code - Type the code for authentication (e.g,
1234).
mOTP secret - Use the 32 digit-secret number generated by
mOTP in the mobile phone (e.g., e759bb6f0e94c7ab4fe6).
It is available when System User is set with false. The web
proxy over SSL will be applied for VPN.
To clear the selected one, click
selections.
It is available when System User is set with false. Choose
one of the SSL Application profiles (VNC) for applying into
this profile.
To clear the selected one, click
selections.
It is available when System User is set with false. Choose
one of the SSL Application profiles (RDP) for applying into
this profile.
To clear the selected one, click
selections.
217
to remove current object
to remove current object
to remove current object