Draytek Vigor2960 Series User Manual page 138

Item
Add
Edit
Delete
Refresh
Move Up
Move Down
Rename
Profile
Enable
WAN Profile
Use IP Alias
Alias
Private IP
Protocol
Port Redirection Mode
Public Port Start
Public Port End
Private Port
H o w t o a d d a n e w
H o w t o a d d a n e w
1. Open NAT>> Port Redirection.
2. Simply click the Add button.
Description
Add a new port redirect profile.
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Renew current web page.
Change the order of selected profile by moving it up.
Change the order of selected profile by moving it down.
Allow to modify the selected profile name.
Before using such function, there is one profile existed at
least.
Display the name of the profile.
Display the status of the profile. False means disabled; True
means enabled.
Display the WAN interface of this profile.
Display the type (no, Single_Alias, All) the IP Alias used.
Display the selected WAN IP address.
Display the private IP used for this entry.
Display the protocol used for the entry.
Display the direction for the port to be redirected.
Display the starting number of the public port.
Display the ending number of the public port.
Display the number of the private port.
P o r t R e d i r e c t i o n p
P o r t R e d i r e c t i o n p
130
r o f i l e
r o f i l e
Vigor2960 Series User's Guide