Draytek Vigor2960 Series User Manual page 128

3. The following dialog will appear.
Available parameters are listed as follows:
Item
Interface
Enable
Speed
flow_control
Note
Apply
Cancel
4. Enter all the settings and click Apply. The profile has been edited.
Description
Display the name of LAN interface profile.
Check the box to enable the Mirror function for the switch.
Use the drop down list to specify the transmission rate for
such profile.
Click Enable to enable such function. When the data cache
is approaching to full load, Vigor router will pause
transmitting the packets till the system is able to accept new
data again. It can avoid the network traffic congestion.
Display addition information for such interface.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
120
Vigor2960 Series User's Guide