Draytek Vigor2960 Series User Manual page 226

For PPPoE Server settings
PPPoE
Quota Reset
Time Quota (min)
Current Time
Used(min)
Traffic Quota(MB)
Current Traffic
Quota (MB)
MAC Binding
Apply
Cancel
4. Enter all the settings and click Apply.
5. A new User Profile has been created.
Click Enable to activate related PPPoE configuration.
It is used to configure the cycle time for PPPoE quota. Note
that each time when the quota is reset, the value of Current
Time Used/Current Traffic Quota will be reset to initial
situation (0).
Everyday – The quota for PPPoE will be reset every day.
Everymonth – The quota for PPPoE will be reset every
month.
Type a time quota for PPPoE connection.
Display the cumulative amount of time that the user used.
Reset - Click it to reset the setting to default value (0).
It is used to set the maximum traffic (MB) for such user
profile.
Display the cumulative amount of data traffic that the user
used.
Reset - Click it to reset the setting to default value (0).
Specify a MAC address which is limited and used for such
PPPoE account.
Enable – Click it to enable the function.
Click it to save the configuration.
Click it to exit the dialog without saving the configuration.
218
Vigor2960 Series User's Guide