Draytek Vigor2960 Series User Manual page 111

Available parameters are listed as follows:
Item
Profile
Enable
Mode
Start IP
End IP
DNS
Vigor2960 Series User's Guide
Description
Display the name of the LAN profile.
Check this box to enable this profile.
Choose Automatic Setting or Manual Setting.
Automatic Setting – It is not necessary to configure Start
IP, End IP and DNS setting. The system will assign suitable
address automatically.
Manual Setting – You should type the Start IP address and
End IP address manually.
Set the starting IP address of the IP address pool for DHCP
server. The format the IP address shall be similar to the
following example:
2000:0000:0000:0000:0000:0000:0000:10 or 2000::10.
Set the ending IP address of the IP address pool for DHCP
server. The format the IP address shall be similar to the
following example:
2000:0000:0000:0000:0000:0000:0000:10 or 2000::10.
Set the private IP address for DNS server. If this field is
blank, users on LAN will treat Vigor2960 as the DNS server.
Add – Click it to add a new IP address for DNS server.
Save – Click it to save the setting.
103