Draytek Vigor2960 Series User Manual page 319

destination target
general target
Vigor2960 Series User's Guide
Profile – type a new name for such IP object.
Address Type –Choose the address type (Single or Range)
for such rule. Each type will bring different settings for
configuration.
Start IP Address - Type the IP address of the starting point
for such profile.
End IP Address - Type the IP address of the ending point
for such profile if you choose Range as Address Type.
Subnet Mask – Choose the subnet mask from the drop
down list if you choose Subnet as Address Type.
Click on the left side of the Destination IP Object/
Destination IP Group profile. Check the object profile(s) as
the destination target.
Destination IP Object – Use the drop down list to choose
one of the destination IP objects for such rule profile.
Destination IP Group – Use the drop down list to choose
one of the destination IP group for such rule profile.
If you want to create a new IP object, simply click
open the following dialog.
Profile – Type a new name for such IP object.
Address Type – Choose the address type (Single or Range)
for such rule. Each type will bring different settings for
configuration.
Start IP Address - Type the IP address of the starting point
for such profile.
End IP Address - Type the IP address of the ending point
for such profile if you choose Range as Address Type.
Subnet Mask – Choose the subnet mask from the drop
down list if you choose Subnet as Address Type.
Service Type - Choose one of the service types from the
drop down list.
311
to