Draytek Vigor2960 Series User Manual page 270

Remote Peer ID
Phase 1 Key Life
Time
Phase 2 Key Life
Time
Perfect Forward
Secrecy Status
Dead Peer
Detection Status
DPD Delay
DPD Timeout
Source IP
Apply
Cancel
Peer ID is on behalf of the IP address while identity
authenticating with remote VPN server. The length of the ID
is limited to 47 characters. It is available for Aggressive
Mode enabled only.
The rekey-renegotiated period of the IKE Phase1 keying
channel of a connection. The acceptable range is from 5 to
480 minutes (8 hours).
The rekey-renegotiated period of the IKE Phase 2 keying
channel of a connection. The acceptable range is from 5 to
480 minutes (8 hours).
Enable the PFS function. A new Diffie-Hellman Key
Exchange is included every time an encryption and/or
authentication key are computed on PFS.
Enable or disable the DPD function.
The keep-alive timer. A Hello message will be emitted
periodically when a tunnel is idle. Use the value 0 to disable
this function. The recommended value is 30 seconds if
enabled.
The timeout timer. The peer will be declared dead once no
acknowledge message is received after timeout value. Use
the value 0 to disable this function. The recommended value
is 120 seconds.
Choose one of the LAN profiles as a source IP.
Click it to save the configuration.
Click it to exit the page without saving the configuration.
262
Vigor2960 Series User's Guide