Draytek Vigor2960 Series User Manual page 113

PPPoE Server
PPPoE User Isolation
Deny Internet Access
Except PPPoE User
PPPoE Server Name
Primary DNS
Secondary DNS
PPPoE Server
Authentication Type
User Authentication
Type
LDAP Profile
LAN Profile
Apply
Cancel
4 . 2 . 2 . 2
4 . 2 . 2 . 2
This page displays general information for PPPoE server; allows you to disconnect the
network connection to PPoE server.
Vigor2960 Series User's Guide
Disable – Click it to disable this function.
Enable – Click it to enable the function of PPPoE server.
Disable – Click it to disable this function.
Enable – Click it to isolate the PPPoE users who access into
Internet via Vigor router..
Disable –Click it to disable this function.
Enable – If you click Enable, only the PPPoE user can
access into Internet.
The default name is "v2960". You can modify it if required.
Type an IP address as primary DNS.
Type another IP address as secondary DNS.
Choose the authentication type for PPPoE server.
Any PPPoE user shall pass the authentication of PPPoE
server and access into Internet.
Users in LAN can access into Internet through Vigor router
with RADIUS, LDAP or local authentication. Specify the
type for the users.
It is available when LDAP is selected as User
Authentication Type.
If you choose LDAP as the authentication type, use the drop
down list to specify the LDAP profile.
It is available when RADIUS or LDAP is selected as User
Authentication Type.
Use the drop down list to specify LAN profile for
authentication.
Click it to save and exit the dialog.
Click it to discard current page modification.
S t a t u s
S t a t u s
105