Draytek Vigor2960 Series User Manual page 103

DHCP Options
Lease Time
Specify Remote
Dial-in IP
Gateway IP
Address (optional)
More Subnet
Vigor2960 Series User's Guide
IP address in this field.
– click the icon to clear the IP setting.
DHCP packets can be processed by adding option number
and data information when such function is enabled.
Each DHCP option is composed by an option number with
data. For example,
Option number:100
Data: abcd
When such function is enabled, the specified values for
DHCP option will be seen in DHCP reply packets.
Add – Click it to add a new DHCP option profile.
Save – Click it to save the setting.
DHCP Option – Use the drop down list to choose the one
you want.
Value – Type the content of the data to be processed by the
function of DHCP option.
– Click the icon to remove the selected entry.
Set a lease time for the DHCP server. The time unit is minute.
Enable – Check the box to enable this function. Remote
clients within the range specified below can access into
Vigor2960 WUI.
Such IP address is ready for matching with the function of
Virtual System.
– click the icon to clear the IP setting.
Specify other subnets which might be needed in the future.
Add – Click it to add a new subnet mask with IP address and
specified mode.
Save – Click it to save the settings.
IP – Type the IP address if you click Add for adding a new
entry.
95