Draytek Vigor2960 Series User Manual page 143

Available parameters are listed as follows:
Item
Profile
Enable
Outgoing WAN
Profile
Use IP Alias
IP Alias
DMZ Host IP
Allow DMZ Host to
Access Network
Allowed IP Object
Allowed IP Group
Allowed Service
Type
Apply
Cancel
Vigor2960 Series User's Guide
Description
Type the name of the profile.
Check the box to enable the DMZ Host profile.
Choose a WAN profile for such entry.
Click Enable to invoke IP Alias function.
IP alias that can be selected and used for port redirection.
Before using it, please go to WAN>>General Setup and
enable the wan1 profile. Add several IP addresses under
Static mode for wan1.
Type the IP address of the DMZ host.
Click Enable to make DMS host accessing network.
This is an optional setting.
Use the drop down list to choose the IP object profile(s) to
apply to such profile.
This is an optional setting.
Use the drop down list to choose the IP group profile(s) to
apply to such profile.
This is an optional setting.
Use the drop down list to choose the type(s) to apply to such
profile.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
135