Draytek Vigor2960 Series User Manual page 62

Default MAC
Address
IPv4 Protocol
Mode
IPv6 Protocol Type
Enable Schedule
Reconnect
Schedule Time
Object
Apply
Cancel
Global configuration allows you to enable the profile, give a brief explanation for such
profile, specify the VLAN ID, specify MAC address, choose IPv4 and IPv6 protocol,
and specify the mode of the data transmission (NAT or Routing).
Enable – Click it to enable the default MAC address for
such profile.
Disable – Click it to type the MAC address manually for
such profile.
MAC Address - Specify the MAC address for such profile if
you click Disable for Default MAC address. In default, the
system will determine it automatically.
There are four connection modes for you to specify for IPv4
protocol type. Each mode will bring up different web page.
Determine such profile will be used for NAT or routing.
There are four connection modes for you to specify for IPv6
protocol type. Each mode will bring up different web page.
Enable – Click it to enable the function of reconnecting the
network automatically within the time schedule.
Disable – Click it to disable the schedule reconnect function.
Choose the time object profile to be applied by such WAN.
Click it to save the configuration and exit the dialog.
Click it to exit the dialog without saving the configuration.
54
Vigor2960 Series User's Guide