Draytek Vigor2960 Series User Manual page 104

IPv6 Protocol
IPv6 Address
IPv6 Prefix Length
DHCPv6 SLA
WAN Interface
DHCPv6 SLA ID
Apply
Cancel
3. When you finish the above settings, please click Apply to save the configuration and
exit the dialog.
Subnet Mask – Use the drop down list to choose the one you
want.
Mode – Specify NAT or Routing as the mode.
– click the icon to remove the selected entry.
It defines the IPv6 connection types for LAN interface.
Possible types contain Link-Local, Static and DHCP-SLA.
Except Link-Local, each type requires different parameter
settings.
Link-Local- Link-Local address is used for communicating
with neighbouring nodes on the same link. It is defined by the
address prefix fe80::/10. You don't need to setup Link-Local
address manually for it is generated automatically according
to your MAC Address.
Static –This type allows you to setup static IPv6 address for
LAN.
DHCP-SLA- DHCPv6 client mode would use IA_NA option
of DHCPv6 protocol to obtain IPv6 address from server.
If Static is chosen as IPv6 Protocol, please type the IPv6
address in this field.
Display the IPv6 prefix length.
If DHCP-SLA is chosen as IPv6 Protocol, please choose one
of the WAN profiles in this field.
The ID number set here is used by an individual organization
to create its own local addressing hierarchy and to identify
subnets.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
96
Vigor2960 Series User's Guide