Draytek Vigor2960 Series User Manual page 253

Enable
Idle Timeout
Server IP/Host
Name
PPTP User Name
PPTP Password
Local IP/Subnet
Mask
Remote IP/Subnet
Mask
Route/NAT Mode
If you choose IPSec as the Type, you will get the following screen:
Available parameters are listed as follows:
Item
Profile
Enable
WAN Profile
Vigor2960 Series User's Guide
Check this box to enable such profile.
When Always On is disabled, you have to type the value for
terminating the network connection.
Type the IP address or host name of PPTP server.
Type a user name for authentication in PPTP connection.
Type a password for authentication in PPTP connection.
Type the IP address and subnet mask of local host.
Type the LAN IP address and LAN subnet mask for the
remote host.
Specify the purpose for such profile.
Description
Display the name of the VPN profile.
Check this box to enable such profile.
Choose a wan profile to be used by such profile.
245