Draytek Vigor2960 Series User Manual page 274

3. The following dialog will appear.
Available parameters are listed as follows:
Item
Profile
Enable
Type
PPTP
Description
Type the name of the profile.
Check this box to enable this profile.
There are three types offered here for you to choose. Please
choose PPTP Dial-Out for this case.
Always On - Click Enable to make the profile being always
on.
Idle Timeout (sec) - If the user is idle over the limitation of
the timer, the network connection will be stopped for such
user. By default, the Idle Timeout is set to 300 seconds.
Server IP/Host Name - Type the IP address or the host
name of PPTP server.
PPTP User Name - Type a user name for authentication in
PPTP connection.
PPTP Password - Type a password for authentication in
PPTP connection.
Local IP/Subnet Mask - Type the IP address and subnet
mask of local host.
Remote IP / Subnet Mask - Type the LAN IP address and
LAN subnet mask for the remote host.
Route / NAT Mode - Specify the purpose for such profile.
266
Vigor2960 Series User's Guide