Draytek Vigor2960 Series User Manual page 284

2. Simply click the Add button.
3. The following dialog will appear. Type the name of the profile (e.g., LB_Pool_1,
within 10 characters including digit, letter, and underline) under the Mode tab.
Available settings are listed below:
Item
Profile
Mode
Important!!! If there is no selection for Interface option, please go to VPN and
Remote Access>>VPN Profiles to create a new IPSec LAN to LAN profile with
enabled GRE setting. Then, return to this page to specify the Interface option.
4. Enter all the settings and click Apply.
5. A new profile has been created.
Description
Type the name of the profile (e.g., LB_Pool_1, within 10
characters including digit, letter, and underline).
Choose Load_Balance or Failover.
Load_Balance
Interface – Choose VPN profile(s) as the interface.
Failover
Primary Interface / Backup Interface - Use the drop down
list to specify the VPN profiles for Primary Interface and
Backup Interface respectively.
276
Vigor2960 Series User's Guide