Draytek Vigor2960 Series User Manual page 152

3. The following dialog will appear.
Available parameters are listed as follows:
Item
Group
Enable This Profile
Comment
Apply
Cancel
4. Enter all the settings and click Apply.
5. A new filter group has been added.
6. You can create filter rule by clicking
profile. A setting page will appear for you to add new IP filter rule profile.
Description
Type the name of the IP filter group.
Check the box to enable this profile.
Give a brief description for the profile.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
on the left side of the selected IP filter group
144
Vigor2960 Series User's Guide