Draytek Vigor2960 Series User Manual page 268

Available parameters are listed as follows:
Item
Profile
Enable
Type
Basic
Description
Type the name of the profile.
Check this box to enable this profile.
There are three types offered here for you to choose. Please
choose IPSec for this case.
Always On – Click Enable to make router always keeping
connection.
For Remote Dial-In User- Click Enable to allow the
connection via IPSec remote dial-in host.
WAN Profile- Choose a wan profile to be used by such
profile.
Local IP/Subnet - Type the IP address and subnet mask of
local host.
Local Next Hop - Specify the gateway for WAN interface.
Usually, use the default setting (leave it in blank).
Remote Host - Type the WAN IP address for the remote
host.
Remote IP / Subnet Mask - Type the LAN IP address and
LAN subnet mask for the remote host.
More Remote Subnet – Add more remote subnet in this
field if required.
Auth Type - The authentication to be used by Pre-Shared
260
Vigor2960 Series User's Guide