Making Copies by Erasing Binding Holes (Binding Erase)
IMPORTANT
•
Do not place originals with binding holes in the feeder, as this may damage the originals.
•
When using the Binding Erase mode, the borders you do not select are also erased by
1/8" (4 mm).
1
Press [Process/Layout] ➞ [Frame Erase].
IMPORTANT
Place your original on the platen glass.
2
Press [Binding Erase] ➞ designate the area of the binding
holes on the original.
The border is where the binding holes are located on the original, if you visualize
the original as being face up.
3
Press [Done].
Process/Layout Settings
7
7-75