Collating Copies Into Sets In Page Order (Collate) - Canon Color imageRUNNER C3480 Manual

Collating Copies into Sets in Page Order (Collate)

For instructions on this procedure using the Regular Copy Basic Features screen,
see "Page Order (Collate)," on p. 3-36.
IMPORTANT
•
The Finishing modes cannot be set if [Envelopes], [Transparencies], [Tracing Paper], or
[Labels] is selected as the paper type.
•
If you set the Hole Punch mode, the side of the paper which is printed on will always be
output face down.
•
The Hole Punch mode is available only if the optional Finisher-Y1 or Saddle Finisher-Y2
and Puncher Unit-M1 are attached to the Color imageRUNNER C3480/C3480i/C3080/
C3080i. (The optional Finisher-Y1, Saddle Finisher-Y2, and Puncher Unit-M1 are not
available for the Color imageRUNNER C2550.)
1
7
7-26
Making a Copy With the Express Copy Basic Features Screen
Press [Collate].
The optional Finisher-Z1 is attached.
Press [Collate Not Set] if you do not want to collate the output.
If you want the copies slightly offset vertically in the output tray, press [Offset].
The optional Finisher-Z1 is attached.
Collate Not Set
Collate
Offset