Cover/Job Separator
If you select multiple documents and set the Merge Documents mode, you can
specify the Cover/Job Separator mode. The Cover/Job Separator mode
automatically adds front and back covers, or job separator sheets to divide each
document, using a different type of paper from that used for the main document.
IMPORTANT
•
For information on the modes which cannot be set in combination with this mode, see
"Combination of Functions Chart," on p. 9-6.
4
•
You can set the Cover/Job Separator mode only if you select multiple documents and set
the Merge Documents mode. (See "Merging Documents," on p. 3-61.)
•
You cannot print on the job separator sheets.
•
If you select the Staple mode when an optional finisher is attached, you cannot staple
more than 30 sheets of 11" x 17", LGL, or LTRR paper, or 50 sheets of LTR or EXEC
paper, including sheet insertions.
NOTE
•
The Cover/Job Separator mode is available for the Mail Box function only.
•
Job separator sheets are not counted as prints.
■ Front Cover/Back Cover
This setting adds a front cover or back cover sheet to each set of prints. You may also
print on the front cover or back cover sheet.
4-16
Cover/Job Separator
Selected Documents
Prints
Printed
Front Cover
Printed
Back Cover