Canon Color imageRUNNER C3480 Manual page 247

4
Select [Framing] or [Blanking].
Details of each item are shown below.
[Framing]:
[Blanking]:
NOTE
To continue designating other areas, press an area key ➞ repeat step 3.
•
•
To redesignate an area, select the area by pressing the appropriate area key.
To clear a designated area, select the area by pressing the appropriate area key ➞
•
press [Clear Area].
•
If you want to use different settings for different areas, select the area by pressing
the appropriate area key ➞ select [Framing] or [Blanking].
5
Press [Next] ➞ select [Shift center] or [Do not shift center].
If only [Blanking] is selected, this step is unnecessary. Skip to step 6.
NOTE
•
If the Center Shift mode is already specified beforehand, the Center Shift Settings
screen does not appear.
•
Center Shift settings specified within the Area Designation mode are deleted when
the area settings are canceled.
6
Press [OK].
■ Mail Box (Scan)
1
Select the desired User Inbox number ➞ place your originals
➞ press [Scan] ➞ [Special Features] ➞ [Area Designation] ➞
[Numeric Key Entry].
2
Specify the Area Designation settings in accordance with
steps 3 to 6 of "Copying," on p. 4-68.
Copy only the contents of the designated area while discarding the
rest of the original.
Copy the original by blanking out the contents of the designated
area.
Using Image Creation Modes
4
4-69